It takes heavy to haul heavy. That’s a fact of life in this segment of trucking, where users deal with increasingly massive loads that must be supported and carried economically. You don’t think about “lightweight” when talking about lowboys, which are often long and multi-axled. Operators also use extra-heavy-duty flats and drop decks where low tare weight is also a difficult goal.
Nevertheless, today’s heavy-haul trailers are not as heavy as their predecessors – but it’s a careful balance.
“Loads are getting bigger, wider, heavier, so there comes a point where the word ‘integrity’ comes into play and we don’t want to interfere with that” by trying to cut too much weight, says Troy Geisler, vice president of sales and marketing at Talbert Manufacturing in Rensselaer, Ind. However, modern steels are lighter and stronger than the iron used by Austin Talbert when he founded the firm in 1938 in Chicago.
“We use mostly T-1 (100,000-pound tensile-strength) steel for our higher-capacity products,” which go to 70 tons and more, Geisler says. “For our SRT 30- to 45-ton double drops, we use 80K steel,” which is more than adequate but less costly.
Is aluminum feasible? “Aluminum’s not as robust. We’re definitely crafting, working on trying to reduce weight. But there comes a point where we have to say, ‘Could we build it? Yes. Could they afford it? No.’”
At Cozad in Stockton, Calif., “We use 100% T-1 steel on our products,” says Curt Weeks, the sales manager. “We’re not the cheapest, but we’re the strongest. T-1 is really strong, and it will hold up to extra loading. I’m not gonna say that our customers overload [go beyond a trailer’s rated capacity], but sometimes it happens.”
XL Specialized of Manchester, Iowa, uses a combination of T-1 and 80K steel in some of its products, but spec’ing is a way to cut poundage, says Rodney Crim, vice president of sales. “We build some of the lightest-weight trailers on the market. You can do it by leaving off non-essential equipment.” Like what? “That’s the ‘secret sauce,’” he answers. “Everybody tries to figure out how to do it.”
Lighter weight “has been a theme since I was in this industry, and that’s 25 years,” says Jay Kulyk, president of Rogers Brothers Corp. in Albion, Pa., now in its 111th year. “It’s a little bit misleading because trailers are getting longer. It used to be that a lowboy would have 20 to 22 feet of deck length; now it’s 26 feet and up to 28 feet. As a consequence, they get heavier. But they are lighter. Now a 55-ton detachable gooseneck trailer weighs 21,000 pounds, depending on options and accessories. Ten years ago, a similar trailer but with a shorter deck length would weigh 3,000 pounds more.
“But we take some conservative steps to lighten the trailer,” he continues. “The lighter the trailer, the more the flex, and the more the flex, the sooner it wears out. And the owner doesn’t get as much return on investment. So we have to make those changes very carefully. Our trailers will last almost indefinitely if they’re cared for. We get calls for parts for trailers from the ’50s. In used-trailer ads, you’ll see some for Rogers trailers from the ’90s and ’80s.”
Follow @HDTrucking on Twitter