March 15, 2018 – Products
The HC140 (Gen3) camera monitoring system is designed for applications where placement of the camera is critical for viewing the load. Its low-profile design was achieved by relocating the connector for the camera so that it attaches at the video transmission box (VTB). With new 360 degree rotation, the camera orientation can be directed to the exact perspective needed by the operator.
For example, if the crane’s hook block is located 90 degrees to the left, the lens can be oriented 90 degrees to the right so the view of the camera on the monitor is in the correct orientation. When mounted on other types of equipment, such as a rubber tire gantry or straddle carrier, it is possible to orient the camera for a view of the pins on the spreader bar.
When the application changes, the operator can readjust the camera’s perspective by manually loosening a screw on the camera, adjusting the camera’s orientation, and re-tightening the screw. Further increasing the flexibility of the camera is a unique magnetic mounting system allowing the camera to be installed at various locations on the equipment as needed for the best possible view of the load.
Other improvements found on HC140 (Gen3) are an upgraded camera, delivering wide angles and infrared illuminators for night time viewing. Plus a higher quality housing and nitrogen filled enclosure provides the HC140 with an IP69K rating for optimum performance when fully submerged in water or when working in high operating temperature environments, up to +50°C.
HoistCam Director is also useful for risk management and accident investigation. HoistCam Director transfers video and images to a mobile digital video recorder (MDVR), which captures and stores data from up to eight HoistCam cameras. The MDVR can be configured to automatically upload to the cloud for analysis or archive.